Operating Manual
www.ushio.com
5
Stopwatch Button:
The
GREEN
stopwatch button can be used to program
a custom LED on-time duration. Pressing and holding the stopwatch button for over
half a second will turn on the UV output and keeps the UV on until the button is
released. The amount of time that the button was held down is recorded. The next
time, tapping the stopwatch button for a short time will turn on the UV output for the
recorded amount of time instead of the default of 4 seconds. This recorded time is
stored until the batteries are removed.
WARNING!
Upon power up, the UDC UV drives the LED to full intensity. Avoid
looking directly at the LED when turning ON.
Preset Timer Buttons:
Pressing momentary button next to this
symbol turns on the unit for 4 seconds
preset duration.
Pressing momentary button next to this
symbol turns on the unit for 8 seconds
preset duration.
Battery Hatch Door: The battery cover seals the battery and electronics within the
body of the
UDC PSC.
2.1
BODY DIAGRAM AND DESCRIPTIONS
Battery Hatch Door
Preset Timer Buttons
Programmable
Timer Button
Figure 1:
UDC PSC
Body Diagram
UDC PSC UNIT DESCRIPTION AND
SPECIFICATIONS
SECTION 2
