Midori
™
UDC Portable Spot Cure
www.ushio.com
12
Charging the Batteries
1. Connect charger to a powered USB port or adapter. LCD on the charger will
turn on to indicate it’s properly powered.
2. Insert 1 ~ 2 battery into the slot, make sure + / - are correctly used.
3. Charging will auto start,
– Battery type screen will show the battery type being detected.
– (CHARGE) will show on the [status] screen.
4. When charging is done, (
) will be displayed on the digital screen of the LCD.
5. Remove battery after it’s fully charged.
Reverse / Bad Cell / Short Circuit
Reverse the battery polarity, incorrectly inserting the battery, inserting alkaline
battery or short circuit will result in charging failure, the “Error” icon will be shown
on the LCD display and capacity gauge for the corresponding slot will flash rapidly.
Should this occur, please reposition / replace / remove the battery from the slot.
