background image

26          Cold Press Juicer

HOW TO CLEAN SILICON PARTS:

—

 

CLEANING THE SILICONE BRUSH:

The steps shown below will help you remove 
the Silicone brush from the spinning brush: 
 
1. Hold the spinning brush from the top side  
     as shown in the image. Pull out the ear 
     of the silicone brush from the Spinning 
     Brush. 
2. Hold the edge of the Silicone brush and  
     slide it down, till it is completely out from 
     one side.
3. Similarly, hold the edge of the Silicone  
     brush and slide it down from the other  
     side. The Silicone brush will be detached 
     from the spinning brush.

The below instructions will show you how to 
reassemble the Silicone brush after cleaning: 

1. Hold the spinning brush as shown in the  
     picture. Now hold the bottom edge of  
     the Silicone brush and slide it up, till it  
     completely slides in and locks within 
     the slot.
2. Similarly, hold the edge of the Silicone  
     brush on the top side and slide it up till it 
     locks in completely.
3. Now hold the spinning brush from the  
     bottom as shown in the image and  
     reinsert the ear of the silicone brush into 
     the slot. 

Clean the Silicone brush using water.

1

2

1

2

3

4

3

4

Содержание NUTRIPRESS CPJ 362F

































Отзывы: