Cold Press Juicer 15
OPERATE USHA NUTRIPRESS
Note:
Do not touch the power cord with wet hands.
The juicer may leak if not assembled properly. It may cause electrical shock, short-
circuit, or fire.
• Check the safety of the wall outlet.
OFF
OFF
Reverse
Forward
BEFORE OPERATING:
Wash all the parts before using the juicer for the first time.
Make sure that the silicone plug is assembled properly.
STEP 1: AFTER PREPARING THE INGREDIENTS, PLUG IN
THE POWER CORD INTO A WALL OUTLET.
SWITCH POSITIONS: -
•
ON:
Pulls down and slowly masticates
the ingredients.
•
OFF:
For switching off
•
REV:
Reverse button pushes the
ingredients back up to dislodge them.
Note:
The REV(reverse) button only works
while holding down the switch.
SECTION 4
4a.
HOW TO OPERATE YOUR USHA NUTRIPRESS
(BASIC STEPS COMMON TO ALL KINDS OF RECIPES)
IF THE JUICER STOPS DURING OPERATION:
If the ingredients get jammed inside the
juicer and the hopper does not open or the
juicer stops during operation:
• Switch
OFF
ensuring that the juicer comes
to a complete stop.
• Then press and hold the
REVERSE
button
for 2~5 seconds until the ingredients get
dislodged.
• Let the juicer stop completely before using
the
REVERSE
button again to prevent
malfunction.
• Repeat
REVERSE - OFF - ON
as often as
needed to achieve the desired result.
• If the juicer does not work after these steps,
disassemble and clean the parts before
operating the juicer again.
STEP 2: PRESS THE ON BUTTON TO OPERATE ONLY AFTER INSERTING FEW
INGREDIENTS INTO THE FEEDING TUBE.:
