Installation
09/20
Fl Detect Set V2
9
5.3
Electrical connection
The water sensor can be connected directly to the
Fl I/O port. In this case, however, a Fl
Hub can no longer be connected, as the port is already
occupied.
When the I/O connector is inserted into the socket, this
must cause a clicking noise. If not, please check again
whether the plug is correctly engaged!
When disconnecting, please note to press the locking
lugs of the I/O connectors!
Please plug all parts together according to figure 4.1.
The I/O connector (4) is plugged into the Fl port.
Plug the I/O connection cable from the Fl Hub (see
Fl HUB manual for more information) into the output
(5) of the splitter (2).
