Intended use
09/20
Fl Detect Set V2
5
3
Intended use
Please observe the instructions in these operating instructions as
well as the operating conditions and permissible data in
accordance with the data sheet so that the system functions
properly and remains operational for a long time. In case of non-
observance of these instructions as well as in case of unauthorized
interventions in the system, any liability on our part is void, as well
as the warranty on system and accessories!
An external water sensor can be connected directly to the
Fl I/O port. In this case, however, no Fl Hub or
other water sensor can be connected, as the connection is already
occupied.
The Fl Detect Set V2 contains additional parts for splitting
the Fl I/O connection. Thus, a Fl Hub and an
external water sensor, or several water sensors can be connected
in series.
If the water sensor detects conductive drinking water, it is
immediately shut off via the Fl.
An alarm reset can only be performed via the connected
Fl or its supply voltage.
Any other use or use that goes beyond this is considered improper
use. Usetech GmbH is not liable for any damage resulting from this.
The risk is borne solely by the user.
