Version 24.01.2012
USB-MFD3
Pa
ge
11
3.4.4.
After-market rear-seat-entertainment
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M503.
Note:
As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
4.
Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is activated permanently without disturbing the navigation
performance.
4.2.
Selecting the usbLOGiC as current AV-source
Push the
MEDIA
button of the head-unit and then
select
VIDEO
to choose the usbLOGiC as current
AV-source.
4.3.
Switching between internal USB and AV-input
After selecting the usbLOGiC as current AV source, tap
on the touch-screen to receive the options menu.
Select
Senderliste
(channel list) to open the remote
function menu. Select
Switch AV1/AV2
to switch
between internal USB (AV1) and AV-IN (AV2).
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV-input”), it is not
possible to switch to the usbLOGiC’s AV-input AV-IN (AV2).
