Version 24.01.2012
USB-MFD3
Pa
ge
10
3.4.3.
After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to female
RCA connector R-CAM IN of USB-box USBC-M503.
Connect the green wire of C3C-VW03 to the camera power supply (+12V max. 1A)
The green wire is high (+12V max. 1A) when reverse gear is engaged.
Note:
Only compatible with NTSC-cameras.
Automatic switching on reverse gear from OEM mode to camera input only works
after coding the head-unit per diagnosis computer or our optional available OBD-
coder OBD-MFD3-R-xx (Only possible on MFD3/RNS510 Version B with minimum
software 1100).
If coding is done by diagnosis PC, code rear-view camera to "LOW" in controller 56
radio (not in controller 19 - CAN gateway). After coding the vehicles needs to be
locked to reach sleep mode (30 seconds up to 66 minutes depending on vehicle).
Vehicles with OPS (optical parking system):
If coding is done by diagnosis PC, code to
rear-view camera in controller 10 park assistant 2 (not in controller 19 - CAN
gateway). After coding the vehicles needs to be locked to reach sleep mode (30
seconds up to 66 minutes depending on vehicle).
