background image

1

PRODUCT OVERVIEW

The BSM-200 is a microwave radar system that continuously 

monitors the blind zone behind vehicle’s driver and passenger side 

B-pillar. Intelligent real time detection of moving objects such 

as automobiles, motorcycles, bicycles, and pedestrians, allows 

everyone on the road to have a safer experience.  The BSM-200 

automatically actives when the speed reaches 18.5 mph (30 km/h)

and deactivates when the speed is under 18.5 mph (30 km/h).

The BSM-200 uses multichannel technology to accurately measure 

the distance, speed, and angle of the moving objects. Thus allows 

for OEM like monitoring with less false alarms. A false alarm 

consists of the system alerting the driver when objects are outside 

the blind zone such as vehicles located beyond the adjacent lanes.

The BSM-200’s alert system consist of audible (beeps) and visual 

(LED lights) warning’s. It will warn the driver if the object in the 

detection zone is traveling at 6 mph (10 km/h) or above, regardless 

of whether or not it is approaching you, keeping pace with you, or 

if you are passing it.

PRODUCT WARRANTY NOTICE

USA SPEC solely distributes its products through authorized 

dealers in order to ensure its customers receive proper services 

and information from the dealers. USA SPEC reserves the right 

to only offer technical support or warranty services for products 

purchased through authorized USA SPEC dealers. Please refer to 

our website www.usaspec.com for a list of authorized dealers.

 

Содержание BSM 200

















Отзывы: