USASPEC BSM 200, Руководство по эксплуатации продукта

Страница: 12 / 16

9
TESTING THE SYSTEM
Before putting the bumper back on, run the below system test
steps first.
1. Keep your eyes on the LED indicators on the A-pillars and
start the vehicle
2. If the indicator lights up for 3-5 seconds then turns off, it
means the system is ready to go.
3. If one or both of the indicators stay ON, it means the
sensors are not connected properly or the OBDII plug is not
inserted all the way in. Please check and make sure all the
connections are secure.
Testing the RCTA system.
1. Start the vehicle
2. Apply foot to the parking brake then put the vehicle in
reverse.
3. Have someone stand adjacently behind the back of the car.
Then, have the individual walk up to the left or right rear of
the vehicle
4. The included speaker will BEEP repeatedly and the LED
indicator for the corresponding side will flash.
Note: If you have successfully completed the above step,
your system is properly installed and ready to go.