5
3 Web Browse Operation Guide
3.1 Common Operations
Factory settings
：
IP speed dome camera is a kind of network equipment, you need configure network IP
address, gateway and other information reasonably, and camera with default IP address in factory,
and user could change it according to their requirement.
Default IP address
：
192.168.0.99
Subnet mask
：
255.255.255.0
Gateway
：
192.168.0.1
WEB port
：
8000
Network parameters
Take the example of Windows XP operating system. Make sure the IP address in network
parameters of the user computer is in accordance with the one of the camera, they are in same
segment, the IP address in the same LAN cannot be the same, otherwise, it will interfere with
each other, causing the equipment couldn't operate normally.
After setting IP address, you could test whether it has been connected between the computer and
the camera by using the PING order from clicking the “start”-”run" button in the bottom left
corner. The format of the command: ping 192.168.0.99
If the screen shows like this:
