30
Picture 3.2.6-28 IP address Filter
Event→Motion detection
Area setting: click mouse left key and drag it, then release mouse left key, this will finish
drawing area. When user finishes drawing all area, you can set arming schedule and linkage
method.
Click “Clear all”, will clear all drawing area.
Tick “enable motion detection" means start IP camera motion detection function. See picture
3.2.6-29
Sensitivity: 0-100 settable
Picture 3.2.6-29 Motion Detection
“Arming schedule” shows the arming time of the current motion detection.
Click [edit] could edit the arming schedule, could set arming schedule for the whole week or some
day in a week.
