Page 4
SAFETY PRECAUTIONS & MAINTENANCE
WARNING: The use of procedures not specified in this user manual
may result in electrical hazards.
Follow these instructions when using the weighing indicator:
1. The weighing indicator should be on a stable surface.
2. Do not touch the internal components with your hands
3. Disconnect any form of power supply when making electrical connections because the
weighing indicator is sensitive to static electricity.
4. Avoid climbing on the unit
5. If any of the components are cracked, do not use the product under any circumstance.
6. The use of the weighed indicator is restricted to weight measurement
7. Unplug the charger once the battery is fully charged to prevent damaging the battery.
8. Limit the weight on the indicator to the prescribed Maximum capacity to prevent
damaging the inner load cell.
9. Stay with in the unit’s rated load limit
10. Do not leap on the scale
11. Only professional staff should conduct the calibration inspection and maintenance of
the weighing indicator.
12. If the sample to be weighed consists of material containing static electric charge,
discharge the samples’ static electricity before weighing it. This is important because
the static electricity may influence the weighing process. Alternatively, clean the pan
(both sides) and the case top with an anti-static agent.
This manual emphasizes the need to take anti�static precautions
Before opening the protective container that contains ESDS devices, ensure any accumulated
charge on the human operator’s body has been dissipated to avoid any hazardous situation.
Placing one’s hands on a grounded surface or, preferably, wearing a grounded Anti-static
Wrist Strap and an Anti-static Mat can be used to dissipate the accumulated charge.
