SETUP INSTRUCTIONS:
To setup a floor
first determine the position of the floor and the corner where you want the main power
cable. Figure 1-15 shows the powered corner floor trim piece at the corner of the floor panel with
adjoining edge trim pieces.
Figure 1-15
The next step should be to connect the Main Power Cable and the Powered Trim piece together. To do
this flip the L shaped
corner main connector and the powered trim upside-down as shown in
Figure 1-16.
Figure 1-16
Remove the four screws holding the cover to the Powered Extension Trim Piece. This will expose the
plug and socket for connecting to the main power connector piece. Make the connections as shown in
Figure 1-16 and replace the cover. Be sure not to pinch wires. Then flip the pieces right side up as in
Figure 1-15. Start laying Floor Panels down starting in the corner as shown in Figure 1-12. The next step
will be connecting the Floor Panel plugs to the trim sockets and bolting the Floor Panels to the Trim
Pieces.
The ARCH Portable Lighted Dance Floor System
Copyright USA Dance Floor, LLC
