US USFG-24, Руководство по эксплуатации

Страница: 12 / 20

- 11 -
Stove Operation
Before using the stove for the first time, please use a mild detergent to wipe it for
cleaning. Do not use corrosive or abrasive detergents.
Turn the burners on about 15-20 minutes before broiling for preheating, according
to the cooking requirement to adjust the flame size.
Notice: Before first preheating, the furnace will smoke. This is because of
protective lipids on the grills and other parts are heated, it is normal, and it will be
eliminated after the power up to the maximum for burning an hour.
Exchange main fire nozzle to switch gas source
Remove control panel, grill, the pilot light head, and bottom tightening screw of the
end of burner (arc), take out burner, then remove main fire nozzle with proper open
spanner, exchange nozzle of another gas source, then screw it (Fig.5). Reinstall burner,
the pilot light head, grill and control panel in proper place.
Caution: Each main fire nozzle of the burner has been installed before delivery,
normal use without adjustment but only switching gas. Adjust only by authorized and
licensed technicians. When you change the gas source, exchange the corresponding
pressure maintaining valve which installed on air intake. See 2.
Adjust air input
Remove control panel, unscrew damper solid screw (Fig.6), revolve damper left to
right (Fig.7), meanwhile, observe flame and adjust an appropriate opening degree. Then
screw damper solid screw, make sure the equipment will not get loose in the process of
moving and translation. Reinstall control panel.
Caution: Each burner damper has been adjusted before delivery (once air input),
normal use without adjustment but only switching gas. Adjust only by authorized and
licensed technicians.
Fig.5 Fig.6 Fig.7