US Water Systems FSF-150, Руководство пользователя

Страница: 13 / 28

13
Installation Instructions
6. Using the Allen Key (included), place the unit in the bypass position (See page 18 for by-
pass valve handle placement). Slowly turn on the main water supply. At the nearest cold
treated water tap nearby remove the faucet screen, open the faucet and let water run a few
minutes or until the system is free of any air or foreign material resulting from the plumbing
work.
7. Make sure there are no leaks in the plumbing system before proceeding. Close the water
tap when water runs clean.
8. Proceed to start up instructions.
Note: The unit is not ready for service until you complete the start - up instructions.