1) Add Water
Ø
Remove grey cap and add tap
water to both tanks
Ø
Each tank holds one gallon
2) Plug into Electrical Outlet
Ø
The SteamHERO should be the
only appliance plugged into the
electrical outlet
Extension Cord
Ø
Use only a 12-gauge / 15AMP
rated or higher rated extension
cord
Ø
Max length: 25ft
3) Push the ON/OFF Button
It will take 10 minutes for the
SteamHERO to heat up and reach
working temperature
4) Connect the Hose
Ø
Secure the SteamHero by
pushing down the front brake
locks; locking the wheels will
make it easier to push the hose
into the steamer
6) Insert the hose into the
connection port
Ø
Push until you hear a “click”
7) Steam Control
Ø
Unlock by pressing RED button
on hose handle
Ø
Squeeze trigger
4) Adjust Steam Pressure
Ø
Turn the knob on front of
SteamHero to increase or
decrease steam pressure
Start-Up
6
Quick Start
