2-4
Courier V.Everything Internal Modems: Getting Started
Plug and Play Setup
The Courier is Plug and Play capable, but is shipped with
settings for COM2 and IRQ3. To prepare the Courier for
installation in a computer with a Plug and Play operating
system, locate the jumpers at the bottom corner of the card.
Figure 2-2. Location of the Jumpers.
1
Remove
the jumper from C. The positions of all other
jumpers, including the IRQ jumpers, are irrelevant while
Plug and Play is selected, and are ignored.
Plug and Play
Figure 2-3. Setting the Jumpers for Plug and Play.
2
Go to Setting the DIP Switches on page 2-8.
