US Robotics 000698-13 -, Руководство по началу работы

Страница: 94 / 151

11-2 Courier I-modem Getting Started Guide
Setting PPP/ML-PPP Host and Originate Mode
Use the following *P settings to control PPP/ ML-PPP:
To do this Use this
setting Or these settings
Set all PPP-related
default values
*P=0 *V2=5, S68.2=0, S68.3=0,
S68.6=0, S69.1=0, *D1=2,
*D2=24 *D3=90, *D4=44, *K=1
Set Asynchronous to
Synchronous PPP
*P=1 S68.2=1
Set Single Link
TurboPPP
*P=2 S68.2=0, S68.3=1
Set ML-PPP
*P=3 S68.2=0, S68.3=0 (default)
Note: Before you can use this feature you must enable
PPP/ ML-PPP using *V2=5.
Making Calls With ML-PPP
You can make ML-PPP calls with any PPP dialer.
Making an Outgoing ML-PPP Call
When making an outgoing ML-PPP call, enter the number of the host. If
the phone number for two calls is different, you must enter both of them.
They must be separated by an ‘&’ as shown below. If only one phone
number is given, the same number will be dialed for both calls.
Making an Incoming ML-PPP Call to Your I-modem
When someone attempts to call your I-modem using ML-PPP, they must
call the Data number first and the Voice number second.
See the following figures for an example of phone numbers with and
without ML-PPP using Windows 95. These rules apply when using
terminal programs with other operating systems.