US Robotics 000698-13 -, Руководство по началу работы

Страница: 56 / 151

6-10 Courier I-modem Getting Started Guide
11 Incoming Modem/Fax Call Routing
Select one of the following:
To use The I-modem routes incoming analog calls
Analog
Device Port
To the Analog Device port (handled by the device
attached to the Analog Device port).
Data Port To the Data Port (handled by the I-modem).
12 Bus Configuration
Select Point-to-Point.
If You Have One SPID and One DN
Make these modifications when entering your line
configuration.
2 Data Channel Service Profile ID
Enter your SPID (up to 20 digits).
3 Data Channel Directory Number
Enter your DN. Do not include your area code.
7 Analog Device Channel Service Profile ID
Enter your SPID (up to 20 digits).
This field should be blank if you have only on SPID.
8 Analog Device Channel Directory Number
Enter your DN. Do not include your area code.
10 Switch Protocol Type
Select AT&T 5ESS Custom.
11 Incoming Modem/Fax Call Routing
Select one of the following:
To use The I-modem routes incoming calls
To Analog
Device Port
To the Analog Device port (handled by the
device attached to the Analog Device port).
To Data Port To the Data Port (handled by the I-modem).
12 Bus Configuration
Select Multipoint.