US COOKING EQUIPMENT USSP-18-1, Руководство по эксплуатации

Страница: 12 / 26

- 11 -
Debugging
It’s very important to debug the new stove. Through the comprehensive system test
of equipment, we can ensure function and safety performance of products. Discovering
any potential problems before use (such as equipment’s placement, ventilation,
operation, etc.), can avoid costly losses.
Safety Notices and Precautions
Warning! For your safety, do not place petrol and other flammables nearby. Please
keep clean and free of flammables surroundings. (Read ANSI Z83.14B, 1991 for
reference)
Warning ! Any erroneous installation, adjustment and refit may cause property
damage or personal injury and maintenance failure. Read the instructions carefully
before installation and using.
Warning! Operation instruction must be placed in a conspicuous location. When
customers smell gas in the process of using, should take safety precautions immediately.
Immediately turn off the main gas valve, extinguish all heat and flames, and call 911.
Safety information can be obtained from your local gas suppliers.
Safety precautions should always be followed, including the following:
The Heavy Duty Stock Pot Stove burners, cooking grates and outside surfaces will be
hot to touch during and after use.
Turn off the equipment when repairing, maintaining and cleaning;
If the equipment has any problems of equipment damage, gas piping leaks, igniter
or valves damage, or lose product accessories, do not operate, and call for service
immediately;
The use of attachments not recommended or sold by the manufacturer may cause
fire, personal injury or even death;
Do not use outdoors;
The equipment is used for cooking, not available for any other use;
The equipment does not contain any user-serviceable parts. Dealers or technicians
will repair it. Do not take apart any spare parts without authorization;
Never change any other parts without authorization to this equipment, may cause
hazards, and the manufacturer has the right to void warranty service;
Steel cutting producers used to manufacture with sharp edges. The manufacturer
has dealt with these sharp edges during production, however, we insist the operator take
care when in contact with this piece of equipment;
Always keep hands, hair and clothing away from heating source.
Wait until the unit cools down before cleaning.