US Blaster Black Reference Series User Guide
6
4. Setting up the speakers
The setting up of the speakers is very important for a Home Cinema installation. That's why we pay
special attention to the correct setting up here.
4.1 Center speaker
You can but the center speaker below or on top of the television screen. Lots of information comes
form this speaker.
Make sure that this speaker is more or less at ear level of your listening position. That can sometimes
mean that the speaker must be tilted forward slightly.
4.2 Front speakers
The front speakers form an important part of the Home Cinema sound just like the center speaker.
The front speakers must be set up at ear level. You can fasten them to the wall with special brackets
available in the shops, or mount them on a speaker stand. Various models of these stands are
available in sound equipment shops.
The speakers must be an equal distance to the left and right of the center speaker, and at least 1.5
metres apart. Furthermore, the speakers must also be in a straight line with the center speaker. This is
shown clearly on the diagram. If you don't do this the sound will go out of phase, which can mean a
considerable distortion of the total sound.
Finally, the front speakers must also be directed towards the listener.
Speaker set-up
4.3 Bass speaker / center unit
Low tones travel more easily than high tones in sound. The positioning of the low tone speaker is
therefore not so relevant. In the case of the USB 4022 the center unit does not actually only function
as a bass speaker. The center unit also accommodates the amplifiers and has an infrared sensor for
the remote control. Put the Black Label Reference Series center unit, therefore, in a place where the
remote control can operate it easily. You can find the best place by trial and error. It is important,
however, that there is enough space around the center unit and that the opening of the cabinet, where
the indicator panel, is directed towards you.
Содержание USB 4022
Страница 1: ......
