US Blaster USB 4022, Руководство пользователя

Страница: 5 / 12

US Blaster Black Reference Series User Guide
5
3. Rear panel connections
1 ....... Phase correction setting. You use this control for the fine-tuning of the sound ratio between the
front and rear speakers for your listening position.
2 ....... Low-pass filter setting. You can set the frequency for the sound from the center unit with this.
You can adjust it to your own preference.
3 ....... Switch for standby mode. The set is always on in the ‘On’ position. In the ‘Auto’ position, the
center unit will switch to a standby position if there is no signal on any of the line inputs for 20
minutes.
......... The unit will automatically switch itself back on when there is a signal again.
......... You switch the center unit off when it is in the Off position.
4 ....... Line inputs; connect the corresponding outputs of your media player to these inputs.
5 ....... Speaker connections, see Connecting speakers.
6 ....... On/off switch. This is the main switch for the whole set.
7 ....... Mains power level selector switch. Set this to 220-240V;
8 ....... Fuse holder / input for mains power cable; connect the power cable to an earthed plug socket.
To replace the fuse, see chapter: Solving problems.