URSUS TROTTER UT-MEINER1803, Инструкция по эксплуатации

Страница: 8 / 12

On/off
button
Cord rewinder
button
Clean the dust container:
1. Press the button on the dust container handle. (Fig
1)
2. Lift up dust container.
3. Press dust container bottom button to dump dirt
(Fig 2)
B. Fully clean/wash dust contaienr
1. Twist the top cover from dust container (Fig 3)
2. Twist the HEPA filter frame from dust container
(Fig 4)
3. Twist Plastic frame from dust container (Fig 5),
then fully clean or wash dust container
Carry and move away the unit:
Note:
There is a handle on the top. You could use it to
conveniently carry the unit.
Removing & cleaning pre-motor filter, centric
HEPA filter, and air outlet filter
Warning:
Always unplug the unit from electrical outlet before
getting out the dust container.
A. Pre-motor filter
1. Press the button on the dust container handle. (Fig
1)
2. Lift up dust container.
3. Take out the pre-motor filter for cleaning and
changing.
B. Centric HEPA filter
1. Twist the top cover from dust container (Fig 3)
2. Twist the HEPA filter frame from dust container
(Fig 4)
3. Take out centric HEPA filter (Fig 5)
C. Air outlet filter
1. Press the air outlet grid button to open
2. Take out the air outlet filter for clean and change.
Fig 1 Fig 2
Fig 3
Fig 3
Fig 4
Fig 4
Fig 5
Fig 5