urmet domus iPerTAlk 1375, Руководство по установке и настройке

Страница: 51 / 100

51 DS1375-020E
6. Select the MAC address of the special decoder to be configured. Alternatively, if you want to define a device
that is not currently connected to the network, you can define it manually by typing the MAC address of the
device in the MAC field (without separators and with all lowercase letters, as required by iPerTAlk system).
7. In the “ Name ” field, enter a meaningful name.
8. Configure the Outputs by setting the “ Mode ” parameter to Toggle or Monostable mode. If the Monostable
mode is set, it is mandatory to set the “ Time ” parameter with a positive value in seconds, from 0.5 to 20
seconds, with intervals of 0.5 seconds.
9. Inputs always have the “ Link with Output ” fields set to “Active” with the respective output. When the Input 1
terminals are closed, Relay 1 will be activated according to the relay setting, in the case of a “Toggle” setting
the first press will activate the Relay and the next press will deactivate it.
11.12.3 USING THE SPECIAL DECODER
At this point you can use the decoder you have just configured.
1. Through a
telephone terminal . Pick up the handset and dial the following syntax:
*86*<decoder_id>*<output number>*<output status 0=OFF, 1=ON>
For example, to activate output 1 (configured as monostable) of decoder 123, the command would be:
*86*123*1*1
For example, to disable output 1 (configured as toggle) of decoder 123, the command would be:
*86*123*1*0
If the output is configured as monostable, it is necessary to always send the activation command, in this
way the output will be kept active for the configured time and then automatically disabled (the deactivation
command is used only in the case of a toggle configuration).
2. Via input . Acting on the physical input of the device by means of a directly connected button, the relative
output will be activated: if configured as monostable, it will be activated for the configured time and then
automatically disabled. If, instead, it is configured as toggle, it will change its status each time the relative
input is activated.
3. Via MAX video door phone by pressing the activation button (for further information, refer to the MAX video
door phone instruction booklet Ref. 1375/825).
11.13 PERSONAL AND SYSTEM DIRECTORY
Through the myTalk Web interface it is possible to access the Phonebook function (available for Administrator
users).
Through the page dedicated to the directory it is possible to:
— search for contacts in the directory; the search can be made using the filter by selecting the initial letter in the
Surname and Organization column or through the free text search by entering the Surname and Organization
in the Search field;
— make calls to the numbers in the directory (both internal and public) in click-to-dial mode: by clicking on the
icon representing the type of contact (Office Phone, Business Mobile or House Phone) the iPerTAlk system
calls the telephone extension associated with the myTalk user, which starts ringing, and after the user answers
the call, the number selected in the directory will also be called.