urmet domus Hybrid DVR 1080N Series, Руководство пользователя/Instruction

Страница: 12 / 108

DS1093-520 12
2.4 MOUSE OPERATION
The mouse can be used to operate the system in addition to the remote control. The following table shows the possible
actions which may differ according to the state and the current system screen.
ACTION MODE FUNCTION
Right click
Live display
This activates the Main Menu (pop-up menu) on the lower part of the screen
Main Menu or
submenu
This closes the current menu and go back to the previous page
Left click
Logout
Click on any item of the pop-up menu in the low part of the screen to open a login
window where to enter access credentials
Login Click on any item of the pop-up menu to directly access the required submenu
Main Menu
Click to access the items of the various submenus; in [Detailed file] play a previously
recorded file.
Submenu
Change the check box state and the motion detection area.
Click on the combo box to open the drop-down menu; left-click to stop timed view
when active.
On the colour control bar and on the volume control bar click to adjust the respective
values.
Click on the combo box to access the drop-down menu.
Click to select the values in the specific combo boxes. This activates the drop-down
menu for support to enter Chinese characters, special symbols, numbers and letters
to be used instead of [Enter- ] or [Backspace
]
Double click In live or playback mode, double click to view the image in full-screen mode, repeat
to go to the previous view.
Move the
mouse
This selects the menu item
Drag the
mouse
In motion detection mode, drag the mouse to select the motion detection area; in
[Color set] mode, drag the mouse to adjust the colour and volume bar.
2.5 CAMERA AND MONITOR CONNECTION
Connect camera cable to video input of DVR, and from video output of DVR to Monitor via VGA/HDMI connector (Refer to
section 2.2- (Rear Panel); or if the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of
DVR respectively (refer to system figuration on Section 2.2.4).
2.6 POWER SUPPLY CONNECTION
Please only use the power adapter supplied with the DVR.
After power on please make sure the video I/O connection well, audio device with RCA cable.