EASIVOICE SYSTEM
ELECTRONIC INTERCOM SYSTEM
4
−−−−
sec.2
EASIVOICE
DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
Mod. 926
ELECTRONIC INTERCOM SYSTEM Mod. 926
PUSH BUTTON PANEL AND AMPLIFIED LOUDSPEAKING UNIT - POWER SUPPLY Ref. 926/3
TABLE SET
For table mounting it is necessary to buy the table kit that includes
stand, cord with socket and accessories Ref. 926/4.
Proceed as follows:
•
Remove the intercom casing by means of a screwdriver in the area
indicated, rotating the cover on the two upper hooks.
•
Release the two side latches E by pressing them from the inside of
zone F.
•
Fix the plate under the base by means of the proper screws.
•
Insert under the base, in the proper holes, the two self adhesive
rubbers (included in the socket kit).
•
Insert the cord with socket and fi x it to the hook. Then connect the
system wires to the correspondent terminals of the terminal board.
The connection cable wires to the door phone socket wire are very
specifi c for table installations. They must be connected to the intercom
terminals as follows:
MI Black
D
Yellow
+12 Red
MF Gray
L1 Green
L2
Blue
L3 Pink
L4
Brown
L5 White
Connection for the loudspeaking unit (Ref. 926/2 only):
CA Yellow-Gray
2
Pink-Black
1 Yellow-Black
-/~
Black-Gray
AP Yellow-Pink
PUSH BUTTON PANEL AND AMPLIFIED
LOUDSPEAKING UNIT
The devices normally used in 4+n wire door phone systems can be
employed.
POWER SUPPLY Ref. 926/3
This power supply has been designed according to the IEC 12/13
5th Ed. Dec. 1988 International Security Regulations - and is built
following the present market requirements, the tendency of which is to
centralize the electric equipment in proper cabinets.
Yellow - Gray
Pink - Black
Yellow - Black
Black - Gray
Yellow - Pink
Black
Yellow
Red
Gray
Green
Blue
Pink
Brown
White
162 mm
118 mm
90 mm
75 mm
45 mm
Sch. 926/3
EASIVOICE
