14
DS9854-007B
6.2. WALL MOUNTING WITH
THE KIT REF. 1083/88
1. Fix the base of the container (supplied in the
kit) to the
fl
ush-mounting box mod. 503 or
Ø 60mm as shown in the following
fi
gures:
n. 2 M3.5 x 19 mm
supplied
Box Mod.503 -
horizontal
n. 2 M3.5 x 19 mm
supplied
Box Mod.503 -
vertical
n. 2 2.9 x 13 mm with
countersunk head
Box Ø 60 mm
or, alternatively, with screws and anchors supplied
in the kit.
Ensure cables are led through the left
side.
2. Remove the 2 covers from the device.
2
1
3
3. Secure the device to the base in the
recommended position.
4. The local power supply must be installed in the
electric panel or a cabinet.
5. Connect the device to the system and to the
power supply provided.
The end of a stranded conductor must
not be consolidated with mild soldering
in the points in which the conductor is
subject to contact pressure.
6. Carry out the device con
fi
guration by means of
jumpers and/or dip-switches.
