urmet domus 826 DIGITAL CALL SYSTEM, Руководство пользователя

Страница: 39 / 118

826
PROGRAMMING
Residents’ names are programmed using a 48-key alphanumeric
keypad (Ref. 826/56) connected to the electronic directory by means
of the associated connector.
Connecting the alphanumeric programming connector.
The programming procedure is activated automatically when the
keypad connector is plugged in, and the main menu will appear on the
display:
The four following operations can be performed at this point:
•
Select language.
•
Enter ONE name.
•
Delete ONE name.
•
View software release.
Upon completion of any of these operations, the main menu will return
to the display. This approach is illustrated in the chart below:
After programming is complete, disconnect the alphanumeric keypad.
The following message will appear on the display for a couple of
seconds:
The directory will then return to normal operation.
NOTE: The following message may appear on the display several
times in the programming steps used to enter ONE name or
delete ONE name:
In such cases, do not press any keys until the message disappears
from the display.
ELECTRONIC DIRECTORY Ref. 826/58
PROGRAMMING
SELECTING LANGUAGE
From the main menu, press “L” (or “S” in the German version)
SEVERAL TIMES until the desired language appears on the display
(ITALIANO - ENGLISH - DEUTSCH). Then press the enter key (
↵
) to
confi rm: the language will change and the main menu will automatically
return to the display.
NOTICE:
To abandon the language selection procedure at any time and
return to the main menu, press the call button “C” ON THE
DIRECTORY.
ENTERING A NAME
To enter a new name, press <E>. A blank display will appear:
Enter the name, which may consist of a maximum of 16 characters,
if necessary using the “sp” key to enter spaces and the backspace
key (
←
) to make corrections. After entering the name, CONFIRM by
pressing the enter key (
↵
).
The code (number) assigned to the name must now be entered. The
following prompt will appear:
Enter the code, which may consist of a maximum of four digits, using
the number keys. If necessary, use the backspace key (
←
) to make
corrections.
After entering the code, CONFIRM by pressing the enter key (
↵
).
NOTICE:
To abandon the name entry procedure at any time and return to
the main menu, press the call button “C” ON THE DIRECTORY.
When the display is blank, the procedure can also be abandoned
by pressing the enter key (
↵
). Note that the same code can be
assigned to several different names (e.g., in cases where several
people with different surnames occupy a single apartment).
During the entry procedure, however, the system will check that
this is INTENTIONAL rather the ACCIDENTAL. Thus, the following
message will appear if an attempt is made to enter a code which
is identical to one that has already been stored in memory:
Press “Y” (or “J” in the German version) to confi rm that two names are
to be assigned the same code, or “N” if the same code was assigned
by mistake. In the latter case, the system will prompt you to enter the
code again.
WARNING: TWO IDENTICAL NAMES CANNOT BE ENTERED. If an
attempt is made to enter a name which is already in memory, an
error message will appear.
NOTE: To return to the name entry step from the code entry step,
press the backspace key (
←
) when the number fi eld on the
display is clear.
DELETING A NAME
To delete a name, press “D” (or “A” in the German version).
The following prompt will appear on the display:
SELECT LANGUAGE
ENTER NAME
MAIN MENU
DELETE NAME
VIEW SOFTWARE
RELEASE
L
E
D
V
E = Enter
D = Delete
KEYPAD
DISCONNECTED
PLEASE
WAIT ...
JOHN SMITH
Number:
Number already exists
Continue? (Y/N)
FIND NAME
with
←
or
→
E
L
E
C
T
RONI
C
D
IR
E
C
T
OR
Y
R
ef.
826
/5
8
O
U
T
D
OOR
S
T
A
T
ION
E
Q
U
IPM
E
N
T
1
- 31
MT124-019