30
DS1099-106
8.3.4
RECORD
Click on
【
Record
】→【
Schedule
】
to access the following page.
In this page it is possible to set the weekly schedule of video recording function on the SD memory card.
Stream type
: this parameter indicates the stream that the camera uses to video record files on the SD memory card. Default:
Mainstream.
Schedule
:
it is possible to set the type of video recording (Normal, Motion triggered,Human, No record) and the time when
the recording function is activated by the camera.
Holding the left button pressed, drag the mouse to select the programming periods. Single cells can be enabled by clicking on
each of them.
By clicking on each weekday’s name, the whole day line is enabled/disabled.
Default: No Record.
Press
Save
to save the changes.
ø
IMPORTANT NOTE:
It is possible to activate manually the recording of a single file using the http command:
http://IP/Record/HttpEvent/Call
Description:
•
IP: to be replaced with the actual IP address of the device
The Manual recording is executed also if the Record Schedule is “No Record”.
ø
IMPORTANT NOTE:
No matter the record type (Normal, Motion, Manual) each footage is finalized and saved to the memory once the file has
attainted the size of around 14MB.
8.3.5
SYSTEM
The System menu contains the following items:
【
Date/Time
】
,
【
Users
】
,
【
Info
】
and
【
Log
】
. The respective
interfaces and descriptions are shown below.
1) DATE/TIME SETTING
Click on
【
System
】
→
【
Date/Time
】
to access the following interface.
PARAMETERS
: the Device Name can be changed here.
