DS1099-106
27
Setting procedure
1. Motion detection can be activated/deactivated.
2. Holding the left button pressed, drag the mouse to select the motion detection area. Single cells can be enabled by clicking
on them.
3. Set motion detection sensitivity, options: High, Middle, Low.
4. It is possible, when Motion is detected, to trigger the following actions:
Send e-mail
: with picture attached
Send to FTP
: pictures are saved on the FTP server (to set an FTP server refer to section
【
Network
】
→
【
FTP
】
)
Video Rec on SD
: event video is recorded on the camera’s SD memory card (not included)
Push Notification
: push notification is received by the URMET app V-Stream on smartphone (IMPORTANT: it is
also necessary to enable the push reception for each camera inside the V-Stream -> ALARM menu).
Snapshot on SD
: event picture is saved on the local micro SD memory card (not included).
5. Click on Save to make the setting active.
PROGRAMMING (Schedule)
Click on
【
Alarm
】
) →
【
Schedule
】
to access the following interface.
