DS 1092-133
35
Option
Value
Description
AREA SEL.
AREA1
AREA2
AREA3
AREA4
The scene is split up into areas that can be activated by
the user (see below)
AREA STATE
ON
OFF
Select this option to enable (ON) or disable (OFF) motion
detection for previously selected areas.
HEIGHT
000
013
This function allows to define the height of the selected
area.
WIDTH
000
013
This function allows to define the width of the selected
area.
LEFT/RIGHT
000
013
This function allows to move horizontally in the monitor
the previously defined area.
TOP/BOTTOM
000
013
This function allows to move vertically in the monitor the
previously defined area.
DEGREE
000
013
This function allows to increase or decrease the motion
detector sensitivity.
Use the camera joystick to select a value from 0 (high
sensitivity) and 255 (low sensitivity).
VIEW
ON
OFF
Select this option to activate (ON) or deactivate (OFF) the
display of the motion detection area.
RETURN
/
It allows to quit the submenu.
AREA SEL – SELECTION OF MOTION DETECTION AREA
Select this option to access the selection display:
In this special screen, the scene is split up into sectors, that can be activated by the user.
Therefore it is possible to make some specific points sensitive to movement (up to 4) and exclude other
ones. For example, if the scene includes a door and a window, the alarm can be activated only by a door
movement, excluding any movement of the window.
Press to the side the button on the camera front panel to select the zone (for example the door) and
confirm by pressing the central button.
To deselect the point, press again the button to the central position.
Содержание 1092/218
Страница 99: ...DS 1092 133 99...
