UREC SBH-170, Руководство пользователя

Страница: 7 / 27

4
General
Information
1.1 Important
Safeguards and
Disclaimers
● Do not attempt to disassemble or tamper with the product at your discretion as it may cause
product malfunction, electric shock, loss of recorded data, and warranty to be voided. Do not apply
excessive force, shock, or vibration to the product.
● Storing this product in a humid or dusty location may result in product malfunction or failure.
● Do not wipe the product using liquid chemicals or detergents; use dry microfiber cloth to clean the exterior.
● Prevent liquid or objects of any kind from entering the product and cable. If liquid is spilled or
foreign matters are seeped into the product, disconnect power immediately.
● Do not cover up product with a towel or cloth-like material. Increased internal temperature may
cause product to malfunction or become a fire hazard.
● Normal operating temperature is between -4°F ~ 140°F. Long-term exposure and extended use of
this system outside of the operating temperature can cause the system to malfunction.
● If you notice any strange odors from the cigarette jack, stop using product and contact where it was
originally purchased. Also, do not use damaged cigarette lighter plug cables and do not handle it
with wet hands.
● If the vehicle is expected to be parked for an extended period of time, disconnect power from the
product to prevent battery drainage and/or electric discharge.
Care & Maintenance
● Never remove the MicroSD card while the product is in operation or firmware upgrade is in progress,
as doing so may damage the SD card and will be ineligible for warranty replacement.
● To remove MicroSD Card, unplug power cable at the top of device, wait 30 seconds and check to be
sure that LED is powered off before removing SD card.
● Make sure to create backup files as necessary.