18
6.2.2 Setting Target HPA
Copies HPA setting from source device to target.
Scroll to select "6.2 HPA Copy Modes >> Copy HPA Settings”, then press "OK" to save this
setting.
6.2.3 Copy and Setting
Copies HPA setting and data from source device to target.
Scroll to select "6.2 HPA Copy Modes >> Copy All HPA”, then press "OK" to save this setting.
6.3
Skip Bad Sectors
Scroll to select "6.3 Skip Bad Sectors”, then press "OK" to scroll through the available values
for skipping bad sectors. If the device data is critical and needs to be a full clone, it is
recommended to set “Skip Bad Sectors” at "0.” Bad sectors can be set as unlimited or at a
value from 0 to 65,535.
6.4 Clear HPA at Erase
Sets to clear HPA setting during erase.
Scroll to select "6.4 Clear HPA at Erase”, then press "OK" to save this setting.
6.4.1 Release
Clears HPA setting and data during erase.
Scroll to select "6.4Clear HPA at Erase >> Release”, then press "OK" to save this setting.
Caution
HPA function “Copy and Setting” may change the original parameter of target
devices. To reset it, user must set “6.4 Clear HPA at Erase >> Clear HPA Setting”
and then execute “4. Erase.”
Caution
The “Copy+Compare” function is advised for enhanced copy accuracy.
[Skip Bad Sectors]
1000
