ureach CopyBox Pro, Руководство пользователя

Страница: 4 / 28

Function table
4
8. Setup
1. Auto Start Time
Allow the system to do the Copy,
Test, Compare and Copy +
Compare functions automatically.
2. Display Mode
1. Basic
2. Show Timer
3. Show Speed
3. Button Beep
4. Eject On Start
1. Eject All Discs
To eject all trays with disc inside
once the system is booted up.
2. Do Not Eject
No eject any tray or disc once
the system is booted up.
3. Eject Target Only
Only eject target trays with disc
inside once the system is booted
up.
4. Eject Source Only
Only eject source disc once the
system is booted up.
5. Eject All Trays
To eject all trays once the system
is booted up.
5. Reader Speed
To adjust the reading speed of
source drive.
6. Compare Speed
To adjust the speed of drives
while comparing.
7. Language
8. Clear Setup
To reset all the function back to
manufacturer’s default setting.
9. Advanced Setup
1. Power On Time
To set a warm-up time from 5
seconds to 99 seconds
.
2. Startup Menu
To select which function you
would like to show up in the
beginning
3. Skip Reader Error
To set skip the read error and
keep copying.
4. Change Bad Master
To make the system eject
source disc and ask for another
one while the source disc is
unreadable for system.
5. CD Overburn Set to copy overburn CD.
6. Show HDD Image
Name
To show HDD image name
or capacity on Copy, Test,
Copy+Compare and Compare
function.
7. Keep Buffer
To set enable or disable load
source to the buffer.
8. Boot Password
To enable or disable the user
administrative password.
9. Setup Password To set up the login password.
10. Count Password To set up counter login password.
U-Reach UPRO User Guide V1.0(EN).indb 4 13/4/22 上午10:18