6. The
Learning IR window
opens and the hub is
readied
to accept IR
commands into the front panel lens.
●
Status:
The status of the learning system is displayed at the top of the
window. This informs on whether the system is prepared to learn a
command of if there is some problem. It displays one of the following
messages:
�
Attempting to start learning mode:
The editor is attempting to
connect to the hub in order to start the learning mode.
�
Learning:
The hub is ready to receive an IR command from the
remote control.
�
Successfully learned:
The hub accepted the learned IR code.
�
Communication Error/Fail to start the learning mode:
The hub
did not enter learning mode, timed out after inactivity, or an error
occurred during the learning process. Usually this can be resolved
by selecting the Retry button or closing the window and choosing
the Learn button again.
●
Button Name:
A button name text label is required to save the
command. If learning a command to a button that already has a
command on it, there is already text there which can be changed if
desired.
●
Function Name:
A function name is required to save the command.
This label is not shown to the user on the remote control screen but is
used in the editor. If learning to button that already has a command on
it, there is already a function name which can be changed or used.
83
