URC MX HomePro MXHP-R700, Руководство пользователя

Страница: 4 / 16

Before Getting Started:
Prior to installing an MX HomePro system, there are a few things to remember:
● MX HomePro systems are designed for use on the home’s local network .
The hub can be connected to the home network through an Ethernet cable or
wirelessly via Wi-Fi.
● Adding a TRF-ZW Z-Wave Gateway gives the MX HomePro system access to
control the home’s Z-Wave devices such as locks, thermostats, lighting,
cameras, and scenes.
● Programming is performed via the MX HomePro Editor . The smart home
professional must log into this web portal in order to program all applicable
MX HomePro devices. Further enhancements may be added, for all inquires
please contact
URC Technical Support .
● This remote communicates exclusively through 2.4 GHz Wi-Fi using
b/g/n signals.
Connecting the Lithium Polymer Battery:
When getting ready to add the remote to the system or replacing a battery, perform the
following steps:
1. Press the spring lock down to open the remote cover.
2. Place the battery (included) into the compartment making sure to align the
contacts on the battery and the remote.
3. Replace the cover.
2
Using the Charging Cradle:
Connect the 6V DC adapter into the power outlet and into the rear of the charging cradle
(also connects to the remote for direct charging). Gently place the MXHP-R700 remote
into the cradle. The remote automatically aligns itself to the contacts on the charging
base. The status light immediately illuminates:
● Red indicates that the remote is charging.
●
Blue indicates the remote is fully charged.