background image

13

MX HomePro Editor:

To begin programming the system, log into the MX HomePro Editor via:

www.mxhomepro.com

See the MX HomePro Programming Guide for more details.

Specifications:

LCD:

 2 inch screen (240 x 320) LCD Backlighting by LED

Devices: 

Supports up to 255 devices with text, less with heavy graphics

Macro Capability:

 Up to 255 steps each; however, nesting is allowed

Wi-Fi:

 IEEE 802.11 b/g/n

Battery:

 Lithium polymer 1,960mAh

Battery Charging Time:

 5 hours

Size:

 8.46” H x 2.04” W x 1.02” D

Battery Warranty:

 90 days

Limited Warranty Statement

Click on the section title above to read the full terms and conditions of the
Limited Warranty Statement. Also available publicly on the URC home page.

End User Agreement

Click on the section title above to read the full terms and conditions of the
End User Agreement. Also available publicly on the URC home page.

Federal Communication Commission Interference Statement:

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

Consult the dealer or an experienced radio/TV technical for help.

Содержание MX HomePro MXHP-R700

















Отзывы: