Urbanears PLATTAN ADV, Руководство пользователя

Страница: 3 / 52

Power button
Micro USB connector for charging the battery.
Zound Plug – Instant music sharing or wired connection to the
sound source
CONTROLS
PLATTAN ADV WIRELESS USER MANUAL ENG PLATTAN ADV WIRELESS USER MANUAL ENG
CHARGING
Plug the headphone into a USB power source using the micro USB cable. 2 hours charge gives approximately 8 hours of playback at
medium volume.
SWITCH ON
Press and hold the power button for 1 second
SWITCH OFF
Press and hold the power button for 2 seconds or leave the headphone inactive and disconnected for 10 minutes
CONNECTING TO A BLUETOOTH® ENABLED SOUND SOURCE
Follow the steps below when pairing the headphone with your sound source (smartphone, tablet or computer) for the first time.
Activate the Bluetooth® feature on your sound source, according to its user manual.
1. Set the headphone in pairing mode.
2. If the headphone is switched off: Press and hold the power button for 6 seconds.
•
The ‘power on’ tone will sound after 1 second and when entering pairing mode, a second tone will sound.
•
If the headphone is switched on: Double-click the power button.
Note: This method does not work if the headphone is already paired to another sound source.
The LED indicator blinks blue when in pairing mode.
3.
Select and connect to Plattan_BT on your sound source, according to its user manual.
After the initial pairing, the two devices will auto-connect when they are switched on and within range of each other (10 meters).
PLAY/PAUSE/
ANSWER CALL
Single tap
PREVIOUS SONG
Swipe backward
NEXT SONG
Swipe forward
HANG UP/
REJECT CALL
Double tap
DECREASE
VOLUME
Swipe downward
or press and hold
the lower part.
INCREASE
VOLUME
Swipe upward or
press and hold the
upper part.