11/2015
NT BEA-G6EVO
V3.0
EN
p. 4/58
i.
INTRODUCTION
Thank you to have been relying to URBACO by purchasing the G6EVO access control bollard.
In addition to provide details on operating instructions, this installation and operation manual is design to assist the
Users, Installers, Maintainers and Operators Staff.
Should you require any further information or specific assistance, please contact us.
ii.
FIELD OF APPLICATION AND AIMS
This manual is covering all steps that must be carefully follow while installing, maintaining and operating the equipment,
to ensure the good functioning and safe of product and personne.
It is intended for specifying implementation site and adequate equipment, design the secure entry system, install,
connect, test and maintain the whole equipment.
The purpose is to insure that all risks are controlled to keep safe any individual, owner, users or any personnel that
could carry out any installation, maintain or repair task on this equipment.
This symbol indicates strict attention must be given to the instructions.
The product must be used only for its intended use. Any other use is considered dangerous. The company URBACO
S.A. is not liable for any damage caused by improper, wrong or unreasonable use.
The product's safety and, consequently, its proper installation are tied to the respect of it technical characteristics and
of its installation and use, which are specifically shown in this manual.
iii.
DECLARATION OF CONFORMITY
URBACO, 457 avenue du Clapier, 84320 Entraigues sur la Sorgues, certify that the G6EVO bollard is intended to be
incorporated into other equipment or to be assembled to other machinery, for the purpose of constituting machinery
that complies with EC Machinery Directive 2006/42/CE.
URBACO also certify that the G6EVO bollard complies with the fundamental safety requirements of the following
Directives:
2004/108/CE - Electromagnetic Compatibility Directive (CEM),
2006/95/CE - Low Voltage Directive
And that it is forbidden to commission the bollard until the machinery into which it will be integrated or of which it will
become a component is identified and until the declaration of conformity to the conditions established by Directive
2006/42/CE.
As well as the following regulations:
NF P 98 310,
NF EN 124 Class F
EN 61000-6-2 and EN 61000-6-3 - Electromagnetic compatibility,
EN1050 - Risk assessment principles,
EN60529 - Methods for testing the IP protection rating equipment,
EN11201 - Method for measuring machinery's sound power levels,
EN60068-2-1 and EN60068-2-2 - Machinery's environmental testing methods,
Decree PMR No. 2006-1657,
EN13849-1 and EN13849-2 - Machinery safety.
iv.
GUARANTEE AND RESPONSIBILITIES
The owner of the system is responsible for the proper performance of the associate works, as well as the proper use,
and must check that the instructions in this manual will be follow strictly.
Warning! For the safety of people, it is important to strictly follow all of the instructions contained in this installation and
operation manual. Before installing, carefully read all instructions and recommendations.
It is the responsibility of the owner of the equipment to establish which legislation is applicable to the country in which
the equipment is installed, and to ensure compliance with all national and local regulations.
Where associated equipment is supplied or fitted by others, the owner of the equipment is responsible for insuring that
the equipment complies with all safety requirements, norms and compliance and any associated equipment does not
adversely affect the operation or safety of equipment supplied by URBACO.
URBACO is not liable for any consequences resulting from installation, commissioning and system maintenance jobs
that are non compliant with the instructions in this manual.
URBACO warrants this system for 12 months from the delivery date. This guarantee can be extended with a specific
agreement.
