manualshive.com logo in svg

URAL Motorcycles ADIRONDAC, Руководство пользователя, Страница: 71 / 91

Поделиться
Скачать
URAL Motorcycles ADIRONDAC Скачать руководство пользователя страница 71

71

•

loss of time, inconvenience, loss of motorcycle use or other consequential damages.

•

any motorcycle on which the odometer reading has been changed so that the actual

       usage cannot be determined.

DISTRIBUTOR’S LIMITED WARRANTIES - REPLACEMENT PARTS

Warranty Time Period
Duration:
Six (6) months coverage of genuine 

URAL

 parts for defects in material and workmanship:

Genuine 

URAL

 parts repaired or replaced under this warranty are covered for the remainder of the

six (6) months warranty period of the purchased part.

Coverage Begins: The date of purchase from an Authorized 

URAL

 Dealer.

To qualify for this warranty, the genuine 

URAL

 part

•

must have been purchased from an Authorized 

URAL

 Dealer

 

     •

must have been used in an application for which it was designed or otherwise  approved in

       writing by Classic Motorcycles.
Warranty Coverage
Classic Motorcycles will repair or replace, at its option, any genuine 

URAL 

part that is defective in

material or workmanship under normal use.

Parts installed by an Authorized 

URAL

 Dealer:

Parts & Labor: No charge.

Parts not installed by an Authorized 

URAL

 Dealer:

Parts: No charge.
Labor: You pay for removal/installation charges.

This Warranty Does Not Cover

The following exclusions apply specifically to replacement parts in addition to the exclusions

listed.

•

 tires

•

 the machine in which the part is installed

•

 parts replaced under the warranty of the machine in which the part is installed

•

 the color match of painted components (Classic Motorcycles makes no warranty, ex

         press or implied, regarding the color match of painted components)

DISTRIBUTOR’S LIMITED WARRANTIES - URAL ACCESSORIES

Warranty Time Period

Duration: Three Months
Bolt-on Accessories (other than audio equipment):

Содержание ADIRONDAC




























































































Отзывы:

Нет отзывов