URAL Motorcycles ADIRONDAC Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 91

URAL Motorcycles ADIRONDAC Скачать руководство пользователя страница 66

66

Replacement of expendable maintenance items including, but not limited to:

•

spark plugs

•

gaskets

•

coolant

•

belts

•

clutch plates

•

filters

•

hoses

•

lubricants

•

fuses

•

rubber pedals

Paint and/or decals fading, peeling, blistering or chipping.

See “Maintenance of Motorcycle” section for oil from seals and/or gaskets.

Motorcycles converted to another model without specific written approval by Classic Motorcycles.

Use for the following activities, such use will VOID coverage:

•

racing

•

competition

•

rental or other commercial uses

•

towing

Alteration of the odometer so that the actual mileage cannot be determined may VOID coverage.

Additional Warranty Exclusions For Tires and Replacement Parts
Please refer to the “This Warranty Does Not Cover” section of these warranties for a listing of
additional items and circumstances that are not covered.

CMSI reserves the right to examine any or all parts claimed for replacement under warranty
prior to reimbursement.

DISTRIBUTORS LIMITED WARRANTIES - NEW MOTORCYCLE

Classic Motorcycles warrants to the first retail purchaser and subsequent purchasers of this Ural
motorcycle that the motorcycle is free from defects in materials and workmanship for the period
stated below.

To Qualify For This Warranty

•

The Ural motorcycle must originally have been purchased from a dealer within the
United States who is authorized by Classic Motorcycles to sell motorcycles.

•

Prior to delivery to the purchaser, setup and pre-delivery service must be performed

by a dealer or service center who is authorized by Classic Motorcycles to deliver motorcycles.

«
...
64
65
66
67
68
...
»

Содержание ADIRONDAC




























































































Отзывы:

Нет отзывов