UPS ZINTO A 1000, Руководство пользователя

Страница: 111 / 181

4.) w battery blocks from the packaging,
e ba es originally UPS,
make electrical connection between
Alternatively, use genuine ONLINE replacement bat-
tery.
the UPS system
-fit the retaining
plate removed previously and connect the battery connec-
tor. Pay attention to the polarity
d-red lack- k.
6.) Then re-fit the panel. During this proce pay ntion
orrect seating of th lasti ips.
check
eneral f ion UPS eac m
tenan d!
ting state:
Then remove the ne
position as per th
tteri fitted in the
fasten together and
the blocks.
5.) Carefully fit new battery units in the slot in
and push in slowly to the stop. Then re
: re
c cl
, b
ss
blac
atte to
the c e p
10.4 Function
Please check the g unct of the h time ain-
ce is performe
UPS opera
the primary supply voltage is presen the UPS shou
rmal mode
When t, ld
operate in the no . In th power
e UPS must oper
e event of a primary
supply failure, th ate in the battery mode . No
ld be output in e fault message shou ither case.
Changeover:
A power failure is simulated by switchi ary power
must changeo
ng off the prim
supply. The UPS ver between normal mode and
battery mode (see section 9.1) w
f the pow pri-
ower. The UPS must then switch ck fr
mode
ithout problems.
After the simulation o er failure, re-establish the
mary supply of p ba om
the battery to the normal mode .
s: LED indication
s des , pl ch he
cations match perating mode.
In the operating state
the LED indi cribed a
the related o
bove ease eck w ther
111 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley