UPS ZINTO A 1000, Руководство пользователя

Страница: 106 / 181

10.
dee
vice
2.)
nce-free lead gel accumula-
ent continuously monitors the
e increasing, age-related loss of capac-
wer backup time should be measured
data sheet. If
ificant difference between the value measured
to be cleaned. Contact
fans run unevenly or produce unusual
replacement
at
ed by the user while the system is in
atteries are available from ONLINE
USV-Systeme AG directly or from any authorised dealer.
2.2 Battery inspection
The battery is the key component of the UPS system. The
battery has a limited expected service life, which is heavily
dependent on the ambient temperature and the number of
charging/discharging cycles. High ambient temperatures and
p discharging will considerably shorten the expected ser-
life. To ensure maximum battery service life, the following
two rules should be followed:
1.) Maintain the ambient temperature at a constant 20°C.
void frequent, short discharging. A
The batteries used are maintena
tors. Intelligent battery managem
state of the batteries and automatically recharges them as
required.
To be able to detect th
ity in good time, the po
every six months.
This measurement can be performed manually or using the
DataWatch software supplied.
The measurement performed should be compared with a ref-
erence measurement or the information on the
there is a sign
and the reference value, the battery system should be re-
placed. Please contact your dealer.
10.2.3 Fan inspection
The fans must be regularly checked for dust deposits and
nusual noises. Blocked openings are u
your dealer if the
noises.
10.3 Battery
The ZINTO A series has a hot-swap battery. This means th
the battery can be replac
operation. Replacement b
106 / 181
Manual-ZintoA_final_ger_engl_it_20090929.doc
30.09.2009, Dipl.-Ing. S. Spitzley