Upright ULII-25 Скачать руководство пользователя страница 15

Страница: 15 / 113

Operation

3-5

Section

UL-25/32/40/48 Portable Personnel Lifts

3.3

8. Pull out on Emergency Stop Button, located on

platform control panel (fig. 3-1). In the event of an

emergency push the button in to cut power to all

controls.

9. Push both the middle and top buttons (POWER and

UP), on the Control Box (fig. 3-1), at the same time

to elevate the platform. Release the buttons to stop.

10. Check that the area below the platform is clear

before lowering the platform.

11. Push both the middle and bottom buttons (POWER

and DOWN) at the same time to lower the platform.

Release the buttons to stop.

12. After use, secure unit from unauthorized use by

turning Key Switch to

OFF

and remove key.

EMERGENCY LOWERING

If the Platform should fail to lower, NEVER

climb down the Mast.

Ask a person on the ground to open the Emergency

Lowering Valve to lower the Platform. This valve is

located on the power unit mounted on the Mast.
1. Open the Emergency Lowering Valve by turning the

knob counterclockwise.

2. To close, turn the Emergency Lowering Valve

clockwise.

Once the Platform is fully lowered, be certain that the

Emergency Lowering Valve is closed again. The Platform

will not elevate if the Emergency Lowering Valve has not

been closed.

NOTE: Optional auxiliary platform lowering circuit

allows operator to lower platform when power source

is interrupted. A warning light on chassis controls

shines when batteries for auxiliary platform lowering

circuit are low (Figure 3-1). Batteries for warning light

are located inside chassis control box.

AFTER USE EACH DAY

1. Ensure that the Platform is fully lowered.
2. Park the machine on level ground, preferably under

cover.

3. Secure against vandals, children or unauthorized

operation by turning the Key Switch to OFF and

removing the key.

Содержание ULII-25


















































































































Результаты поиска

Содержание ULII-25

Отзывы:

Похожие инструкции для ULII-25

Бренды по названию

Популярные бренды

Upright ULII-25, Руководство по обслуживанию и запасным частям

Результаты поиска

Содержание ULII-25

Отзывы:

Похожие инструкции для ULII-25

Бренды по названию

Популярные бренды