OPERATOR’S MANUAL
with Maintenance Information
Safety Rules
4
Fall Hazards
The guard rail system provides fall protection. If
occupant(s) of the platform are required to wear
personal fall protection equipment (PFPE) due
to job site or employer rules, PFPE equipment
and its use shall be in accordance with the
PFPE manufacturer’s instructions and
applicable governmental requirements.
Do not sit, stand or climb on the platform guard
rails. Maintain a firm footing on the platform
floor at all times.
Do not climb down from the platform when
raised.
Keep the platform floor clear of debris.
Close the entry gate before operating.
Do not operate the machine unless the guard
rails are properly installed and the entry is
secured for operation.
Collision Hazards
Be aware of limited sight distance and blind
spots when driving or operating.
Operators must comply with employer, job site
and governmental rules regarding use of
personal protective equipment.
Check the work area for overhead obstructions
or other possible hazards.
Be aware of crushing hazards when grasping
the platform guard rail.
Observe and use color-coded direction arrows
on the platform controls and platform decal
plate for drive and steer functions.
Do not operate a machine in the path of any
crane or moving overhead machinery unless
the controls of the crane have been locked out
and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating a
machine.
Do not lower the platform unless the area below
is clear of personnel and obstructions.
