OPERATOR’S MANUAL
with Maintenance Information
Function Tests
16
Test Limited Drive Speed
24 Press the mode button to active the lift
function. Move the joystick to raise the
platform approximately 0.75
m from the
ground.
25 Press the mode button to select drive
function.
26 Press the decelerating button until only one
indicator light.
27 Slowly move the joystick to the full drive
position.
☉
☉
☉
☉
Result: The maximum achievable drive
speed with the platform raised should not
exceed 31 cm/s. If the drive speed with the
platform raised exceeds
31 cm/s,
immediately tag and remove the machine
from service.
Test Auxiliary Lowering
28 Move the joystick to forward direction to
raise the platform approximately 60 cm.
29 Push in the red Emergency Stop button to
cut off the power.
30 Pull the auxiliary lowering knob at the
chassis side out.
☉
☉
☉
☉
Result: The platform should lower to end.
