Attach the thermostat to the back cover
SI0000462
6
1
2
3
Attach the thermostat to the back cover.
1.
Attach the thermostat body to the back cover by using the
2 hooks in the upper part as hinge.
2.
Gently press the thermostat down towards the clips at the
bottom of the back cover until a clicking sound is heard.
3.
The thermostat is attached to the back cover.
Remove the thermostat from the wall
SI0000463
2
1
3
≤ 4 mm
Press the clips at the bottom of the back cover with a flat screwdriver
(width max. 4,0 mm) to unlock and remove the thermostat.
8
|
Uponor Base thermostat display T-27 230V
|
Installation and operation manual
