Important Safety Information
•
Read manual and all product labels before using the equipment.
Do not use unless you know the safe and proper operation of
this equipment.
•
Keep this manual available for easy access by all users.
•
Replacement manuals are available at
www.uponorpro.com
.
•
Disconnect all power before opening the thermostat.
•
It is the installer's responsibility to safely install this thermostat
according to all applicable codes and standards.
•
Improper installation and operation of this thermostat could
result in damage to the equipment and possibly even personal
injury or death.
•
This thermostat is not intended for use as a primary limit control.
Only place controls that are intended and certified as safety limits
into the control circuit.
•
Do not attempt to service the thermostat. There are no user
serviceable parts inside the thermostat. Attempting to do so
voids the warranty.
Radio Frequency Interference
The installer must ensure this control and its wiring are isolated
and/or shielded from strong sources of electromagnetic noise.
Conversely, this Class B digital apparatus complies with Part 15
of the FCC Rules and meets all requirements of the Canadian
Interference-Causing Equipment Regulations. However, if this
control causes harmful interference to radio or television reception,
(determined by turning the control off and on) try to correct the
interference by re-orientating or relocating the receiving antenna,
relocating the receiver with respect to this control, and/or connecting
the control to a different circuit connected to the receiver.
Warning
It is your responsibility to ensure that this thermostat is safely
installed according to all applicable codes and standards.
Uponor is not responsible for damages resulting from improper
installation and/or maintenance.
To avoid serious personal injury and damage
to the equipment:
3
SetPoint 521 Programmable Thermostat Installation and Operation Manual
