Temperature Adjustment
Permanent Adjustment –
No Schedule
When no programmable schedule is
used, push the
or
buttons to
permanently set the “Set Heat Room”
or “Set Cool Room” temperature. This
thermostat is capable of controlling
both air and floor temperature.
Permanent Adjustment –
with Schedule
When a programmable schedule
is used, there are two temperature
settings available, one for the time
period and another for the time
period. When pushing the
or
buttons to change the temperature,
only the temperature for the current
time period is changed.
1. To adjust the temperature for both
time periods, press and hold the
and
buttons for 3 seconds to enter
the programming menus.
2. Enter the “SET TEMP” menu to adjust
the following settings:
•
Set Heat Room (air heating)
•
Set Heat Room (air heating)
•
Set Floor (floor heating)
•
Set Floor (floor heating)
•
Set Cool Room (air cooling)
•
Set Cool Room (air cooling)
Permanent Hold
The thermostat includes a Hold button.
When the Hold button is pressed, the
thermostat stops operating based on the
programmable schedule and the hold
temperature can be set using the
or
buttons. Press the Hold button a
second time to cancel the hold and resume
operating based upon the programmable
schedule. If both an air and floor sensor are
installed, the floor maintains the Set Floor
temperature setting when the hold
temperature is higher than the Set Heat
Room . When the hold temperature
is set lower than the Set Heat Room
, the floor does not maintain
a temperature.
Access Levels
The thermostat has two access levels:
User and Installer. The Installer access
level provides access to all settings.
The thermostat remains in the installer
access level for up to 24 hours after
which it automatically changes to the
user access level.
Once the thermostat has been installed,
set the Lock / Unlock switch setting to
Lock. This hides the access level setting
and prevents unauthorized changes to
the thermostat configuration settings.
26
uponorpro.com
